DNF Controls UABS-I Installation_Manual - Manual (Page 26)

2 2 5 5 of 25 Flex Control Network ® UABS-I Installation Manual
E. Set Ethernet Speed
The default password, when shipped from the factory, is “controls”, all
lower case. The password is used to access all configuration screens.
Using the web browser-
1) From the Home Page, click on the “System” link. The System page
will be displayed.
2) Click on “System Maintenance” Link, the System Maintenance page will
be displayed.
3) Click on “Set Ethernet Speed” Link, the Ethernet Speed Setting page
will be displayed.
4) Click on the Radio button to select the Ethernet speed, and then click
on the Apply button.
OR
Click on the Back button to exit without making any changes.