DNF Controls UABS-I Installation_Manual - Manual (Page 12)

1 1 1 1 of 11 Flex Control Network ® UABS-I Installation Manual
B. Set System Label
The System Label is used to uniquely identify a DC20. This name is
associated with the IP address.
Using the web browser-
1) From the DC20 Home Page, click on the “System” link. The System
page will be displayed.
2) Click on “Set System Label”. The Set System Label page will be
displayed.
3) Enter any name made up of letters, numbers, or special characters, up
to 16 characters.
4) Click on “Save” to save the name entered in step 3).
OR, click on “Cancel” to exiting without changing the System Label.