DNF Controls UABS-I Installation_Manual - Manual (Page 13)

Flex Control Network ® UABS-I Installation Manual 1 1 2 2 of 12
C. Set System Time
The system time is only used for error and event time stamping.
Using the web browser-
1) From the DC20 Home Page, click on the “System” link. The System
page will be displayed.
2) Click on “Set System Time”. The Set System Time page will be
displayed.
3) Using the drop down menus, set the current date and time.
4) Click on “Save” to save the entered date and time.
5) OR, click on “Cancel” to exit without saving.
D. Additional Setups
No additional setups are required in “Event Diagnostic” or “System
Maintenance” for normal operation. The LOGOUT link is used to log out of
the DC20 thereby disallowing any changes that are password protected.