DNF Controls UABS-I Installation_Manual - Manual (Page 16)

1 1 5 5 of 15 Flex Control Network ® UABS-I Installation Manual
B. Serial Device Configuration
1) Click on the “Protocol Assignment” link at the top of the page. The
Protocol Assignment Table will be displayed.
2) Click on “Edit” field under the "Device Configuration". An edit widow
will be displayed.
3) Click on drop down arrow field under the "Control Functions" field and
choose the control functionality (depending on licensed protocols).
4) Select: "Master Control" for the playlist playout channel
"Ingest Review" for the Clip Review channel
5) In the "Device Internal Latency" field, enter the play latency, from the
chart below, for your video server model.
DISK PREROLL Setup Chart for VDCP Protocol
Server Menu Settings
Disk
Preroll
Play Latency
360 systems ON 10 frames
Avid Airspeed OFF 8 frames
Doremi ON 16 frames
EVS XT ON 2 frames
GV PDR, XP ON 40 frames
GV K2 ON 10 frames
GV M-series, Turbo ON 20 frames
Leitch NX400 OFF 11 frames
Leitch NX3600, NX4200 OFF 6 frames
Omneon ON 60 frames