DNF Controls DC20 User Manual
Page 17
Flex Control Network
®
, DC20 / DC21 User Manual
Page 17
B. Event Logs
The display will show a list of fourteen files. There are two files for each
day of the week. Each file has the capacity of about 2 Megs of data.
When the first file gets full the system starts recording to the second
file. If the second file were to get full the system will start recording
back on the first file overwriting the previous data. At midnight the
system starts recording on the next day's file overwriting any previous
data. It is up to the operator to back-up these files if they need to be
retained for any reason.
a.
Enter the IP address of the DC20 to be checked. The DC20
Home Page will be displayed.
b.
Click on the “System” link. The System page will be displayed.
c.
Click on the “System Maintenance” link. The System
Maintenance page will be displayed.
d.
Click on the “View Event Logs” link. The "Event Log File List"
page will be displayed. The display will show a list of fourteen
files.
e.
Click the radio button to select the file you want to view and then
click the "View File" button to view the file.
f.
Click the back button to return to the "Event Log File List"
g.
To save a file to the PC that is running the Browser Program,
Right Click on the file name and follow the "Windows" instruction
as to where to save the file.
C. Trace Logs
These files are for diagnosing specific problems under the direction of
the DNF customer support person. The person will direct you as to
which traces to activate and how to retrieve the file for factory review.