DNF Controls 2034CL-TO - Manual (Page 5)

2034CL-TO, Pinnacle Thunder Protocol 5
Getting Started . . ..
2. SYSTEM DESCRIPTION
The 300 Clip Instant Access System consists of the ST300-SSM VTR Controller, ST420
SHOTBOX and Shotlist Software.
The ST300 controls up to 4 video channels individually or ganged.
The SHOTLIST contains up to 300 CLIP IDs, stored in non-volatile memory in the ST300.
Remotely view the CLIP IDs that exist in the Pinnacle Thunder under control. Desired clips can
be MARKed into the SHOTLIST, at a single location or at multiple locations.
Any clip in the SHOTLIST can be quickly loaded by simply entering the associated 3-digit
number of its location, then pressing [LOAD]. Press [PLAY] to play the clip. Press [RECUE] to
recue to the beginning of the clip.
DEFINITIONS
‰ Throughout this manual, the Pinnacle Thunder will be referred to as “Video Server.”
‰ The ST300-S/SM as the ST300.
‰ The ST420 SHOTBOX is referred to as “SHOTBOX.”
‰ SHOTKEY refers to the 1-30 switches on the SHOTBOX
‰ Words surrounded by brackets, for example, [ENTER], are keys on the ST300 or the
SHOTBOX. [XXX] + [XXX] means hold the two keys down simultaneously.