Shotbox shotkey mapping to shotlist locations, View content of cue points, Shotbox control switches – DNF Controls 2034CL-TO User Manual
Page 14
2034CL-TO, Pinnacle Thunder Protocol
14
16. SHOTBOX SHOTKEY MAPPING TO SHOTLIST
LOCATIONS
The SWITCHES on the SHOTBOX access the SHOTLIST locations as follows:
BANK 0, SWITCHES 1 Æ 30 access SHOTLIST locations 001 Æ 030.
BANK 1, SWITCHES 1 Æ 30 access SHOTLIST locations 101 Æ 130.
BANK 2, SWITCHES 1 Æ 30 access SHOTLIST locations 201 Æ 230.
BANK 3, SWITCHES 1 Æ 30 access SHOTLIST locations 301 Æ 330.
BANK 4, SWITCHES 1 Æ 50 access SHOTLIST locations 401 Æ 430.
BANK 5, SWITCHES 1 Æ 30 access SHOTLIST locations 501 Æ 530.
BANK 6, SWITCHES 1 Æ 30 access SHOTLIST locations 601 Æ 630.
BANK 7, SWITCHES 1 Æ 30 access SHOTLIST locations 701 Æ 730.
BANK 8, SWITCHES 1 Æ 30 access SHOTLIST locations 801 Æ 830.
BANK 9, SWITCHES 1 Æ 30 access SHOTLIST locations 901 Æ 930.
17. VIEW CONTENT OF CUE POINTS
a. Press
[VIEW]. The VIEW indicator comes on.
b.
Press the switch for which you would like to see the content.
c.
The switch turns RED and the content (CLIP ID) of the corresponding Cue Point is
displayed on a virtual display.
For
Example:
NOTE: All the remaining switches are not illuminated.
d.
Release the keys to return to normal operation.
18. SHOTBOX CONTROL SWITCHES
a. [PLAY]: Plays out the selected clip.
b. [RECUE]: Returns to the beginning of the clip.
c. [STOP]: Stops playout of the clip.
VTR 1
Clip 23
VTR 2
Clip 13
VTR 3
Clip 77
VTR 4
No Assignment