DNF Controls 2034CL-TO User Manual
Page 3
2034CL-TO, Pinnacle Thunder Protocol
3
REFERENCE . . . 17
21. SETUP
MENU 17
22. FUNCTION
TABLE 19
23. SPECIFICATIONS
20
A
. ST300
20
RS422
SERIAL
CONNECTOR 20
POWER
CONNECTOR 20
B
. ST420
(SHOTBOX) 21
RS422
SERIAL
CONNECTOR 21
POWER
CONNECTOR 21
24. TROUBLESHOOTING
22
ST420
TROUBLESHOOTING 22
25. KEY
LAYOUT 23
26. DNF
CONTROLS
LIMITED
WARRANTY 24
NOTE:
For DNF software with a date code of 12/07/02 or later, please ensure that you have
previously installed Pinnacle’s latest Thunder software and an updated THUNDER DLL
file. Do not install the DNF eprom until the appropriate Thunder software has been
installed. The Thunder Software Version installed should be Pinnacle Version 5.2 or any
subsequent version issued by Pinnacle.
If you do not have the appropriate version of Thunder software installed, or have any
questions relating to your Thunder software, please contact Pinnacle.
Manual Version............................……............................... 1.6 020604
Document ID....................……...................... 2034CL-TO User Manual