DFI G7B330-BR - Manual (Page 77)

77
3
BIOS Setup
USB Device Setting
Move the cursor to this field and press . The following
screen will appear.
The settings on the screen are for reference only. Your version may not be
identical to this one.
USB 1.0 Controller
This field is used to enable or disable the Universal Host Controller
Interface (USB 1.0).
USB 2.0 Controller
This field is used to enable or disable the Enhanced Host Controller
Interface (USB 2.0).
USB Keyboard Function
Due to the limited space of the BIOS ROM, the support for legacy
USB keyboard (in DOS mode) is by default set to Disabled. With
more BIOS ROM space available, it will be able to support more
advanced features as well as provide compatibility to a wide variety
of peripheral devices.
If a PS/2 keyboard is not available and you need to use a USB
keyboard to install Windows (installation is performed in DOS
mode) or run any program under DOS, set this field to Enabled.
Phoenix - AwardBIOS CMOS Setup Utility
USB Device Setting
Item Help
Menu Level XX
↑↓→← : Move Enter: Select F1: General Help +/-/PU/PD: Value F10: Save ESC: Exit
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
USB 1.0 Controller
USB 2.0 Controller
USB Keyboard Function
USB Mouse Function
USB Storage Function
*** USB Mass Storage Device Boot Setting ***
UFDDA
UFDDB
No Device
No Device
No Device
No Device
No Device
No Device
No Device
No Device
Enabled
Enabled
Enabled
Enabled
Enabled
USB Floppy
USB Floppy
Auto mode
Auto mode
Auto mode
Auto mode
Auto mode
Auto mode
Auto mode
Auto mode