DFI G7B330-BR - Manual (Page 120)

5
120
RAID
Step 2: Configure Serial ATA in the Award BIOS
1. Power-on the system then press to enter the main menu
of the Award BIOS.
2. Select the Integrated Peripherals submenu - OnChip IDE Device
section of the BIOS to configure SATA.
3. Press to return to the main menu of the BIOS setup
utility. Select “Save & Exit Setup” then press .
4. Type and press .
5. Reboot the system.
The settings on the screen are for reference only. Your version may not be
identical to this one.
IDE HDD Block Mode
IDE DMA Transfer Access
IDE Primary Master UDMA
IDE Secondary Master UDMA
SATA Operation Mode
SATA Mode
Phoenix - AwardBIOS CMOS Setup Utility
OnChip IDE Device
Item Help
Menu Level XX
↑↓→← : Move Enter: Select F1: General Help +/-/PU/PD: Value F10: Save ESC: Exit
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Enabled
Enabled
Auto
Auto
Native
IDE
If your IDE hard drive
supports block mode
Select Enabled for
automatic detection of
the optimal number of
block read/writes per
sector the drive can
support