DFI G7B330-BR - Manual (Page 28)

28
2
Hardware Installation
Power-on Select
JP7 is used to select the method of powering on the system. If you
want the system to power-on whenever AC power comes in, set
JP7 pins 2 and 3 to On. If you want to use the power button, set
pins 1 and 2 to On.
Important:
If you want the system to automatically power-on when power
returns after an AC power failure, you must:
1. Set JP7 pins 2 and 3 to On.
2. The PWRON After PWR-Fail field must be set to "On".
(Integrated Peripherals submenu, Super I/O Device section
of the BIOS).
X
JP7
1-2 On:
Power-on via
power button
(default)
2-3 On:
Power-on via
AC power
1
3
2
1
3
2