Delta Dore 230 CPL DRIVER Installation - Manual (Page 7)

- 12 - - 13 -
The Driver 230 CPL must be combined with a GECPL1 or
GP4 CPL energy manager.
Price programming is used to select a lower temperature
(economy) in periods when electricity is most expensive (e.g.
peak hour period, Red day).
Prices are programmed using the programs of the elec-
tronic meter.
Off-peak
Hours
Peak
Hours
Off-peak
Hours
Peak
Hours
Off-peak
Hours
Peak
Hours
CHAU 0
CHAU 1
CHAU 2
BLUE day WHITE day RED day
CHAU 3
CHAU 4
CHAU 5
CHAU 6
CHAU C
Period with active price reduction
Price programming (only in tempo option)
Operating Mode Applicable in Economy
Periods
Turn the knob to .
Press to display PArA.
Press again to enter the price reduction
setting mode.
➊ By pressing the or buttons, select the mode desired
for a price reduction in zone 1 (Economy, Comf -2°C, Comf
-1°C, Comfort (no reduction)).
Note: The Comfort -1°C and Comfort -2°C modes are only
available with 6-order pilot wire heating.
➋ Press to validate and move onto zones 2 and 3
Repeat the operation, then confirm with .
The unit displays the time.
Z2 Z3 Z1