Delta Dore 230 CPL DRIVER Installation - Manual (Page 10)

- 18 - - 19 -
Associating a TYXIA remote control
To associate your Driver CPL with a TYXIA remote control.
On the Driver CPL, set the selector to
and press and hold the button for 5 sec.
The unit displays rAdio.
On the transmitter, press and hold down the
and
buttons together for about 5 seconds.
The buttons will light up, go out, then light up again. Release.
On the Driver CPL, rAdio is no longer displayed.
The emitter’s and buttons are associated with the
Driver CPL. They allow for a Comfort or Economy overri-
de.
Wireless option
Associating a TYDOM 300 telephone
transmitter
To associate your Driver CPL with a TYDOM 300 telephone
transmitter
On the Driver CPL, set the selector to and press and
hold the button for 5 sec.
The unit displays rAdio.
On the TYDOM 300 (transmitter),
press the button on the top of the unit.
The transmitter emits 3 confirmation
beeps.
Check that rAdio is no longer displayed
on the screen.
The TYDOM 300 transmitter is associated with the DRI-
VER CPL.
Deleting all the wireless product associa-
tions with the Driver CPL
On the DRIVER CPL, set the selector to and hold the
button down for 10 sec., until the time is displayed (the
DRIVER CPL displays rAdio after the button is held down for
5 sec.).
All wireless product associations are deleted.