DC Power Technologies FS3 Version 3 - Technical Hardware Manual - Manual (Page 7)

Page | 6
2. Introduction
This manual provides comprehensive technical information about all
aspects of the FSx series charger. It is intended for use by
technically skilled individuals responsible for second level support of
the chargers. It contains considerably more information than
required for a first level field service technician.
Distribution of this manual is to be restricted as the information
contained is not suitable for individuals who do not already have
some knowledge of the correct method to charge forklift batteries.
This information is commercial in confidence and is not to be
distributed to a third party without the express permission of Enatel
Motive Power.
An Operator/Installer manual is available for each charger and is
suitable for distribution to a wider audience.
A software manual is also available covering use of the Charger
Interface software to configure, troubleshoot and customize
operation of the FSx series charger.
It is expected that an individual responsible for the support of the
FSx series chargers will read and understand both the hardware
manual and the companion software manual.