Rss-3 chassis – Dataprobe RSS Series User Manual
Page 4

V130816E.R1
RSS Series
Page 4
2.2.
RSS-3 Chassis
Item # 1150102
The RSS-3
Chassis mounts in standard 19” equipment cabinets. Rack mounting brackets provided, can be
attached to the chassis sides for front or rear rail installations, or removed for non rack applications.
Power supplies, control cards and switch cards install from the rear of the chassis. Install each card into the guide
slots with the components facing upwards. The chassis and cards are keyed to prevent incorrect insertion. Switch
cards may be inserted and removed with the power on (hot insertion/removal). Cards are secured in chassis with
screws at right and left of each panel.
19" W x 1.75" H x 7" D Weigh 3.5 Lbs (w/o cards)
Power Supply Status Indicator
A/B Switch Postion Indicator
Local A/B Control Toggle Switch
3 A/B Switch Card Slots
Control Card Slot
Power Supply Slot