Dataprobe RSS Series - Manual (Page 28)

V130816E.R1
RSS Series Page 28
When you are finished with IPC-1-R, click on Logout. A confirmation page will be displayed. If you close your
browser windows without first clicking Logout, there will be a two minute delay before you can re-access IPC-1-
R.
IPC-1-R will automatically time out if there is no activity for two minutes. This is to prevent accidental lockout by
leaving the browser open.
If the Auto-Ping feature is in use, this page will also display its status, OK or Triggered, and the number of times
it has been triggered. OK indicates that the IP address being pinged is responding. It will display Triggered to
indicate that it has is not receiving a response to the pings, and has performed its programmed switching
function. The Trigger Count indicates the number of times the IPC-1-R has been triggered. This counter can be
reset with a button on the page.