Dataprobe PowerPal Single User Manual
Powerpal functional schematic

11 Park Place / Paramus, New Jersey 07652
TEL: 201-967-9300 FAX: 201-967-9090
Website: www. dataprobe.com Email: [email protected]
Technical Support Hotline: (201) 967-8788
PowerPal uses a dial telephone line to remotely control A/C power. The user can turn power ON, OFF
or Power Cycle (Reboot) by entering DTMF digits using an ordinary tone dial phone. The phone line
connected to PAL can also be used by other equipment in a normal manner after control of power.
With one phone call, you can power up, down or reboot equipment then ring the telephone device
connected to PowerPal’s Extension port.
Pal works by listening for dialing tones (DTMF) after it answers a call. If these tones are heard, Pal will
respond with the current power status and allow additional tones to control the power. Once power
control is completed, the device on Pal’s Extension may (or may not) be rung.
Four call answering modes, security features and power control options make PowerPal both easy to
use and very flexible. An On/Off/Auto switch on PowerPal allows local manual control.
P A L
P O W E R
POWER PAL
Remote Power Controller
Version 2
A/C Source
Dial Line
Line Ext
Switched AC
Any Telephony Device:
Phone / Fax / Modem
Power Controlled Device
PAL
POWER
PowerPal
Functional Schematic
REF: PWR\POWERPAL-VER2_V980326W.DOC