Dataprobe RSS Series - Manual (Page 18)

V130816E.R1 RSS Series Page 18
get console Displays the current console and telnet settings
RSS-16> get console
Auto Logout: 50 minute(s)
Serial Login: Yes
Baud Rate: 9600 BPS
Telnet Enabled: Yes
Telnet Port: 23
Ok
RSS-16>
set console timeout <0-99> Set the current timeout (auto logout) value minutes (0=disable) Default =
set console serial login Set the serial login enable flag
set console serial baud
<2400|9600|57600|115200>
Sets the baud rate on the serial port.
Serial port character format is fixed at : 8 Data bits, No Parity, One Stop Bit, (8,N,1) 9600
set console telnet enable Set the telnet enable flag Default =
set console telnet port <1-65535> Set the telnet port 23
get SNMP Get network SNMP settings
RSS-16> get snmp
Read Community: public
Write Community: private
Manager IP Address 1: 192.168.1.19
Manager IP Address 2: 192.168.4.19
Manager IP Address 3: 10.10.10.60
Manager IP Address 4: 0.0.0.0
Ok
RSS-16>
set snmp enable Set network SNMP enable flag
set snmp readcommunity <0-20> Sets the trap community name for the specified SNMP manager public
set snmp writecommunity <0-20> Sets the read/write community name for the specified SNMP manager private
set snmp manageripaddress <1-4> Sets up to four SNMP managers
get http Get network HTTP (web) settings
RSS-16> get http
HTTP Server Enabled: Yes
HTTP Port: 80
HTTPS Port: 443
HTTP SSL Enabled: No
Ok
RSS-16>