Daktronics DakStats Volleyball - Manual (Page 23)

In Game Operations 17
Quick Substitution Buttons
Quick Subs buttons make substitutions easier and faster.
The software will remember previous subs, or the operator
can pre-set an established sub rotation. Click the button next
to a starter and select the player from the list to pre-set the
incoming sub. Quick Subs buttons will fill in as the match
progresses and more subs are entered. Once players are pre-
set, click the button and the players will automatically switch
as in and out. A few notes about quick subs:
 Unlike the starter subs list that only shows players
not in the game, the quick subs list includes all
members of the team.
 Hold [Ctrl] and click on a sub button to clear a
player that may have been added incorrectly.
 The software does not save quick sub entries upon
closing. If the match is closed and reopened, quick
subs will need to be re-entered.
Timeouts
When a team calls a time out, press [F6] to switch to
the Timeout tab (Figure 17). Press [t] to select which
team is taking the timeout, and then press [Enter].
Cards
In the event of a penalty:
1. Press [F3] to switch to the Card tab (Figure
18).
2. Press [x] to switch teams if needed.
3. Select a Red or Yellow card and the type of
penalty (Player, Coach, Bench, or Crowd).
4. If the penalty is on a player, enter the player
number.
5. Press [Enter].
Rally Scoring
In Rally mode, every serve can result in a point. With
Rally mode disabled, only the serving team can score
a point. To change rally scoring, select the Rally tab
(Figure 19):
 Rally Mode is enabled by default. When the
user enters the Rally tab, Off will be selected
by default as well. Click Enter to disable
rally scoring.
 With Rally Mode disabled, On will be selected by default. Click Enter to re-enable
rally scoring.
Figure 16: Quick Sub Buttons
Figure 17: Entering Timeouts
Figure 18: Entering Cards
Figure 19: Toggling Rally Scoring