Daktronics DakStats Basketball - Manual (Page 69)

Additional Features & Settings 63
8.7 Messaging
The messaging settings help determine
how DakStats Basketball communicates
with other Daktronics software.
The default setting is that the DakStats
Basketball program is on the same
computer as the DSTI program. If these
programs are on separate computers:
1. Go to Configure > Messaging.
2. In the DakStats/DSTI Messaging
window (Figure 100), select
Different Machine.
3. Click OK.
8.8 Quick Display
The Quick Display option allows users
who interface with Venus
® 7000 display
controllers to run sequences from
DakStats Basketball. These settings do
not need to be modified if the DakStats
Basketball program is not interfacing
with a display controller. For more
information about creating sequences,
refer to the Venus 7000 Operator’s
Manual (ED-14551).
1. Make sure to have DakStats
Basketball, DSTI, and Venus
7000 running.
2. In DakStats Basketball, go to
Configure > Quick Display, and the Quick Display window will appear (Figure 101).
3. If the Empty Interface Configuration File! message appears at the bottom of the
window, click Request Config.
4. Right-click an empty cell, and then click Add Item; to modify an existing cell, right-
click the cell, and click Edit Item:
a. In the Configure Quick Display Item window (Figure 102), check the box next to
Show on toolbar.
b. Type in a descriptive Item Name.
c. Check Show on toolbar.
d. Fill in the Enhanced RTD Parameters to specify the desired sequence to play.
e. Fill in the Request Parameters to specify what type of data to output.
Note: Items with the %Select Nickname are not compatible with quick display
buttons.
f. Click OK to save the changes to the quick display button.
Figure 100: DakStats/DSTI Messaging
Figure 101: Quick Display