Daktronics Remote Control System RC-100 - Manual (Page 42)

34 Baseball Operation
Hit, Error
Display Action
Press the or key to turn on the Hit or
Error indicator or digits.
The message at left will appear briefly.
Time, At Bat, H/E (Alternate Function)
The , , and alternate function keys are used to select what is
shown on the two time digits. First press the key and then one of the above keys to
select what is displayed on the two time digits. If is selected, they will show two
digits of time. If is selected, they will show the player At Bat. If is selected,
they will show an ‘H’ or an ‘E’ on the first digit when or is pressed.
Time/At Bat
If the controller is set to show the time, the  > key operates like the standard
key (refer to Section 5.3). If the controller is set to show AT BAT, it will operate
as shown below.
Display Action
NN = current setting
Press the > key, enter the current
batter number, and then press .
ERROR ON
AT BAT: EDI T
NN*