Daktronics KE-1010-7.6-RG - Manual (Page 9)

Section 2: Mechanical Installation
Mechanical installation includes both support structure design and mounting methods. Two
mounting methods are explained in this section, wall mount and ceiling mount.
Mechanical Installation 3
• Daktronics engineering staff must approve any changes made to the displays. If any
modifications are made, detailed drawings of the changes must be submitted to
Daktronics for evaluation and approval or the warranty may be void.
• Daktronics is not responsible for the installations or the structural integrity of support
structures installed by others.
Reference Drawings:
Shop Drawings ............................................................................................ Listed in Appendix A
Mounting Drawing, Ceiling, KE-1010 ............................................................. Drawing A-118572
Shop Dwg, Horiz. Wall Mount, Gen II KE-1010 ............................................. Drawing A-234483
2.1 Support Structure Design
DakTicker KE-1010 displays are generally mounted on the wall or from the ceiling. Support
structure design depends on mounting methods, display size, and weight. (Figure 5). The
structure design is critical and should be done only by a qualified individual. It is the
customer’s responsibility to ensure that the structure and the connectors are adequate. Refer
to the Shop Drawings listed in Appendix A for dimensions and mounting clip locations.
Attaching or hanging anything from the display will render the warranty null and void.
Figure 5: Mounting Options