Daktronics KE-1010-7.6-RG - Manual (Page 26)

Parts Replacement
20
Consult this list for the Daktronics part number for basic display components. Refer to
Section 6.4 for instructions on obtaining parts from Daktronics.
Part Description Daktronics Part #
Controller Board (16-high, RS-422 Input) 0P-1182-0011
Controller Board (16-high, RS-422 or Ethernet Input) 0P-1182-0022
Controller Board (24-high, RS-422 or Ethernet Input) 0P-1182-0023
Shift Board (16-high) 0P-1182-0012
Shift Board (24-high) 0P-1182-0019
Module; 16x40 Super Bright Red-Green 0P-1182-0014
Module; 24x40 Super Bright Red-Green 0P-1182-0018
Signal Converter; RS232 to RS-422, 120V 0A-1127-0255
Serial Cable, DB9 to DB25, from PC to Signal Converter W-1249
Ribbon Cable; 20 Cond. 28 AWG (Between Modules) W-1357
Ribbon Cable; 20 Cond. 28 AWG
(Controller to shift card and shift card to module)
W-1387
Power Supply; +5VDC A-1632
Power Cord; 3-Prong 120VAC W-1181
Splice Bar EN-1772
Mounting Clip, KE-1010-**x***-7.62 0M-233464
Suction Cup, 2 ¼” Dia. HS-1338
Filter; RFI Line Z-1014
Face Panel; 16x240 0A-1182-0015
Face Panel; 16x320 0A-1182-0016
Face Panel; 16x400 0A-1182-0017
Z-Mounting, GEN II, KE-1010-**x120-7.62 0M-233463
Z-Mounting, GEN II, KE-1010-**x160-7.62 0M-234569
Z-Mounting, GEN II, KE-1010-**x200-7.62 0M-234704
Z-Mounting, GEN II, KE-1010-**x240-7.62 0M-234712
Z-Mounting, GEN II, KE-1010-**x280-7.62 0M-234719
Z-Mounting, GEN II, KE-1010-**x320-7.62 0M-234723
Z-Mounting, GEN II, KE-1010-**x360-7.62 0M-234728
Z-Mounting, GEN II, KE-1010-**x400-7.62 0M-234733
Z-Mounting, GEN II, KE-1010-24x***-7.62 0M-235529
DataStreamer Manual ED-13649