Daktronics KE-1010-7.6-RG - Manual (Page 14)

Power Specifications for Tickers with Multiple Sections
# of Phases 16 and 24 High Twin 16 High
Amps Per Line
(100-240VAC)
6.9 (Sum of 3 Sections) 13.8 (Sum of 3 Sections)
Max Watts 825 Watts (Sum of 3 Sections) 1650 Watts (Sum of 3 Sections)
Voltage – Secondary 5VDC 5VDC
3.2 Power Cord - Grounding
Note: Most products are equipped with a 3-wire grounding-type
plug—a plug having a third (grounding) pin. This plug will only fit into
a grounding-type power outlet. This is an essential safety feature. If
the correct outlet is not available for this plug, contact a qualified
electrician to replace the obsolete outlet. Do not defeat the purpose
of the grounding-type plug.
The DakTicker displays are each supplied with a six-
foot long removable power cord. The socket-outlet
should be available near the equipment and easily
accessible. Plug the power cord into the socket on the
back of the display, as shown in Figure 11.
Figure 11: Power Cord Connection
Note: No more than two additional display sections can
be powered from this section. Total length of the
display cannot exceed 20 feet (6.1 M)
If proper grounding methods are not followed, the
warranty will be void.
Power Installation 8