CREATOR DIG Series Full Digital conference system - Manual (Page 46)

CREATOR CHINA 2012-11 WWW.CREATOR1997.COM
39 User's Manual of DIG series Full Digital conference
2、 the NORMAL mode
Reach the limit of maximum number of
speakers and other representatives to speak,
automatically enters the statement waiting queue,
speak to the number of wait queue and set the
maximum number of speakers.
3、 FREE mode
Allow six representatives to speak, no
waiting for.
4、 APPLY mode
Representative unit should get the approval
from Chairman or operator before speak. Without
approval, microphone pole indicator is green.
4.7.3.2 Apply speech
Iin APPLY mode, Representative units press
microphone button to apply to speak t,
microphone pole lights are in solid green state.
Chairman unit "1" key (corresponding to agree)
and "3" key (corresponding to reject) indicators
flash and indicate certain representative is
appling for speaking. Chairman unit press
number"1" key (agree) to approve speech
application, then the application is successful.
Press number "3" key (reject), Representative
application is shut down. The chairman unit
approves a Representative unit to
speak by
pressing the button once, following the "early in
early out " principle.
As representative unit apply to speak,
Chairman unit LCD displays as below:
4.7.3.3 Stop speech
long press priority button of Chairman Unit
CR-DIG5202B2, the screen will display
following diagram interface and close all speaking
Representative unit, the number of speaking
person is zero.
4.7.3.4 the biggest statements
The biggest statements of display is set by
host menu, to set the maximum allowable number
of representatives, not including the Chairman, to
speak at the same time.
The
system supports 8 microphones
simultaneous at the maximum, the maximum
number of speakers is 6, only two microphones of
chairman unit can be opened at the same time.
4.7.3.5 Speeching
"Speeching” on the display stands for the
number of speaking representative units, which
does not include the number of speaking
chairman units.
4.7.4 Services
In conference mode, press "service" key enter
service menu, you can make internal calls, tea
applications,
language switch, view short
messages.
4.7.4.1 language settings
Press "1" key to set language in English or
Chinses temporarily.