CREATOR DIG Series Full Digital conference system - Manual (Page 18)

CREATOR CHINA 2012-11 WWW.CREATOR1997.COM
11 User's Manual of DIG series Full Digital conference
2.1.5.4.7 language settings
Set the languages of the host and
conference units. Host supports Chinese, English,
Chinese Traditional, and representative units
support English and Simplified Chinese.
2.1.5.4.8 Automatic channel
Set the automatic channel. Select "Open", if
there is no translation in this channel, it will
automatically put out original sound. If there is,
the channel will put out the translation. While
select"off", if there is no translation in this channel,
there is no translation, no sound instead of
automatically puting out the original.
2.1.5.4.9 Network settings
Set IP address, subnet coding and default
gateway which are connected to the PC.
2.1.5.4.10 PA settings
Set the speaker switch for conference unit
(excluding translation unit).
"Open", open all the speakers.
"Off", all the speakers are turned off.
2.1.5.4.11 audio settings
Set acoustic feedback suppression (AFC),
noise cancellation (ANC), automatic gain (AGC).
2.1.5.4.12 Default settings
Set to restore the factory settings, all the
parameters of the host will be restored to factory
parameters.
2.1.5.4.13 Version information
Display the version information of the host.
2.1.5.5 Operating examples of Panel
buttons
Such as: set the system's IP address to
192.168.1.125.
The specific operation is as follows:
1、 press the direction button, “
” ， select
"Network Settings" item, the direction button light
flashes by each press. The LCD screen displays
the corresponding menu setting interface. The
selection is successful;
2 、 press "ENTER" key to confirm the setting of
this option, the button light flashes once, LCD
screen displays the following;