CREATOR DIG Series Full Digital conference system - Manual (Page 12)

CREATOR CHINA 2012-11 WWW.CREATOR1997.COM
5 User's Manual of DIG series Full Digital conference
TREBLE——treble adjustment
The TREBLE button has a Treble Easy Setup
function usd to adjust the line output and
conference unit sounds treble. Press the TREBLE
button to enter the following interface to view their
current status or re-set the treble parameters
Setup steps are the same with the the "MODE"
button settings.
VOLUME——line out adjustment
The VOLUME button has a "line out
adjustment" "Easy Setup function usd to adjust
the line out and conference unit volume size.
Press the VOLUME button to enter the following
interface, you can view the current status or
re-set line parameters, Setup steps are the same
with the the "MODE" button settings.
⑤ DELEGATES ACITVE——Conference unit
communication indicator
Communication indicator is corresponding to
the conference unit on the rear panel. When the
conference unit receives a conference unit
interface, its correspondent
Indicator light flashes.
⑥
IN ——external device audio input
Connect to the background music or the
teleconference terminal output.
OUT 1 ~ OUT 2 - Audio output terminals
Connect to a PA system or recording device
for recording.
OUT 1, connect to the PA system or
recording device or teleconference input, Out1
contains the audio of the conference and the line
input audio.
OUT 2, connect to the PA system or
recording device or teleconference input. Out2
contains the audio of the conference and the line
input audio. OUT1 and OUT2 can compose a
balanced output.
⑦
OUTPUTS ——channel audio output
15 +1 channel translator channel audio
output for connecting the host of the infrared
emission.
⑧
MICROPHONES——microphone output
port
8-channel microphone put out alone.。
⑨ The ground column。
⑩ The system power input port
The system power input is AC 100V-240V
50/60Hz.
⑪ DELEGATES——Conference unit interface
Standard RJ45 connector, 5-way unit
connecting port can be connected to the speech
unit or translation unit or junction box.
⑫ ALARM——fire alarm port
Expansion interface, this interface can be
used for fire alarm port
CONTROL SYSTEM——RS-232 serial port
Connect to the host of CR-PGM II central control
system or camera tracking host or backup host to
realize the function of automatic camera tracking.
ETHERNET——the network port
1 Ethernet port, connect to the computer to
implement software management functions of the
Conference
⑬ OPTICAL——Optical output port
1 optical output interface, corresponding to
the audio digital output⑥ in the rear map.
AUX——RS-232 serial port
It is to extend the functionality.