3technicalparameters – CREATOR DIG Series Full Digital conference system User Manual
Page 33

CREATOR CHINA
2012-11 WWW.CREATOR1997.COM
26
User's Manual of DIG series Full Digital conference
CR-DIG5204A2front view
①
volume control knob.
②
headphone jack.
③
The LCD screen (320 * 64). Support 8 Chinese
characters and 16 English letters in the
maximum.
④
IC card slot.
⑤
The 320x64 LCD display, can display
operating information.
⑥
flat-panel microphone
⑦
vent. Do not place hands on top of it when you
are speaking.
⑧
channel selection display (support for display
00-15).
⑨
multifunctional vote button:
- Meeting voting, numbers 2,3,4, respectively
stands for in favor of, waiver, opposed.
- The Conference election, numbers 1-5 keys on
behalf of different candidates.
- Conference rating, numbers 1-5 keys represent
levels of, -, -, 0, +, + +.
⑩
channel selection key.
⑪
microphone switch, Chairman’ priority switch.
Long press the chairman unit microphone key for
three seconds, close all open microphones of
delegate speech unit.
4.2.3 technical parameters
Parameter
CR-DIG5202/04A2
Power Supply
The host power
Frequency
Response
20-20KHZ
Channel
Crosstalk
>
80dB
Microphone
parameters
microphone core
type
Sensitivity
Frequency
Response
Input
impedance
Condenser
cardioid
unidirectional
-46dBV/pa
20-20KHZ
2.2K
Speaker
2W
Signal-to-noise
ratio (S/N)
>
80dB
Headphone
output
Headphone
loads
Headphone
volume
>
8Ω
10mW
Display
Control Display
Card
tables
Display
320X64lattice (blue white)
320X64lattice (blue white)
Total harmonic
<
0.05%
Maximum power
2.2W
Unit interface
8 core aerial head
Dimensions
(mm)
255.7LX156.3WX67.3H
Color
Silver