CREATOR DIG Series Full Digital conference system - Manual (Page 42)

CREATOR CHINA 2012-11 WWW.CREATOR1997.COM
35 User's Manual of DIG series Full Digital conference
Installation steps:
1, open the desktop corresponding to the size;
2 install the embedded digital conference
machine into the opened square hole of desktop;
3, install the fixing plate on pressure riveting
screw under the machine;
4, fix the fixing plate with butterfly nut;
5, making M5X35 the butterfly screws go through
the fixing plate to lock with desktop, so as to fix
the equipment. As below:
4.6.4 panel description
CR-DIG5206CH CR-DIG5202/4C1
CR-DIG5207SP CR-DIG5202/4C2
① headphone jack.
② channel selection display (00-15).
③ Channel Select button.
④ microphone interface.
⑤ microphone switch, Chairman priority switch.
Press the Chairman unit priority button for 3
seconds, close all opened delegate speech units.
⑥ speaker.
⑦ LCD display can display operating
information.
⑧ multifunction vote button: