CREATOR DIG Series Full Digital conference system - Manual (Page 23)

CREATOR CHINA 2012-11 WWW.CREATOR1997.COM
16 User's Manual of DIG series Full Digital conference
⑧ DELEGATES——unit interface
4-way
ports can be connected to
conference unit or junction box
⑨ ALARM——fire alarm port
Expansion interface, this interface can be
used for fire alarm port
⑩ CONTROL SYSTEM——RS-232 serial port
COM IN：Connect to the conference host of
CONTROL SYSTEM，backup the port
COM OUT：Connect to the host of CR-PGM
II central control system or camera tracking host
or backup host to realize the function of automatic
camera tracking
ETHERNET——the network port
1 Ethernet port, connect to the computer to
implement software management functions of the
Conference
OPTICAL——Optical output port
1 optical output interface, corresponding to
the audio digital output⑥ in the rear map.
AUX——RS-232 serial port
It is to extend the functionality ， COM IN
backup the conference host AUX port，COM OUT
output。
POWER INPUT——sysyem power input
port
The sysyem power input is 110V/220V AC
2.2.3 technical parameters
Parameter CR-DIG5200BK
Power Supply 110V/220V AC
Frequency
Response 20-20KHZ
Signal-to-noise ratio
(S/N) ＞ 80dB
Channel Crosstalk ＞ 80dB
Total harmonic
distortion
＜ 0.05%
Maximum output
power
350W
Static power 12W
Dimensions 430L x 260W x88H (mm)
Color dark gray