CREATOR DIG Series Full Digital conference system - Manual (Page 19)

CREATOR CHINA 2012-11 WWW.CREATOR1997.COM
12 User's Manual of DIG series Full Digital conference
3、press the "ENTER" key to determine the type
of the parameter of "IP address", the button light
flashes once, the LCD screen displays as follows;
4 、 enter the "IP address" parameter setting
interface, as shown in Fig. there are four options,
press the direction key “ ”to select the desired
settings, that is, choose option 3, the button light
flashes once by each press, and LCD will display
correspondingly;
5 、 Press "ENTER" key to determine the
parameters of this option, the button light flashes,
the LCD screen displays as follows:
6、press the direction key“ ”， set parameter 001
for "option 3". The button light flashes for each
click, the LCD will display correspondingly;
7、
7、the setting of "Option 3" is completed. Press
"NETER" button to confirm, and then press the
return key "MENU" to return to previous menu;
8、press the "“ ”" button, select "Option 4", the
button light flashes once and the LCD screen
displays the following:
9 、 press "ENTER" key to determine the
parameters of this option, the button light flashes
and the LCD screen displays the following:
10、press the direction key “ ” to set parameter
125 to “option 4 ", the button light flashes for each
press, the LCD will display correspondingly;
11 、 press the “ ” key, select "OK" to save the
parameters setting;
12 、 the IP address setup is completed, press
"ENTER" key to confirm the settings. Then
restarte the host, it will reconfigure the network in
accordance with the set parameters.
Other functional operations of host panel
buttons are similar to the settings of IP address.