CREATOR DIG Series Full Digital conference system - Manual (Page 14)

CREATOR CHINA 2012-11 WWW.CREATOR1997.COM
7 User's Manual of DIG series Full Digital conference
2.1.5.2 The button lamp
On the front panel, there are button operation
indicators always being in the red flashing status.
Button lamp flashes when a button is pressed,
indicating that the selection is successful.
2.1.5.3 menu setup instructions
Once it is properly powered, the LCD display
backlight is lit simutaniously. Till startup is
complete, it will display the main interface, as
shown below:
The menu steps can be summarized as:：
Properly connected and powered
Select
a setting option Determine the setting
options Select the optional parameter
information Determine the parameter
information Go back and determine the set
2.1.5.4 menu structure instructions
Menu structure diagram：