Comtech EF Data Vipersat Circuit Scheduler v3.7.x ArrangeLink - Manual (Page 40)

Verifying Installation
2-22 ArrangeLink User Guide
Verifying Installation
After completing the installation of the ArrangeLink program and the configu-
ration of the server, verify that the application is running correctly and is
communicating with the VMS by using the following procedure.
Verification can be performed either from a local/remote PC workstation that
has browser software (such as Internet Explorer) and network access, or from
the local server that is hosting the web services.
1. Open the browser window and turn off the Pop-up Blocker function. With
Internet Explorer, for example, this is done using the drop-down Tools menu
as shown in figure 2-24.
Figure 2-24 Disable Pop-up Blocker
2. Enter the ArrangeLink target address in the Address field as:
http://<IP_address>/AL
Here, < IP_address > corresponds to the IP address of the hosting server.
When running the program from another workstation, the specific IP address
of the hosting server must be used (figure 2-25). When running the program
directly from the server, localhost can be substituted.