Comtech EF Data CMR-5910 Manual - Manual (Page 21)

Chapter 2. INSTALLATION &
INITIAL CONFIGURATION
2.1 Major Assembly
The MG-SIP and MR-SIP are available in standalone configurations. Table 2-1 lists the
components provided with a standard configuration. In the event any listed item is
missing, please contact Comtech EF Data Customer Support:
Table 2-1. Digicast Serial IP – Standalone Configuration
Quantity Description
1
Digicast Media Router Serial IP:
CMR-5910 Serial IP Gateway (MG-SIP) OR
CMR-5920 Serial IP Router (MR-SIP)
1 SPU24-102 Power Supply
1 IEC Power Cable
1 CA-TERMINAL Terminal Cable
1 CD (includes this manual and the Quick Start reference)
1 Quick Start sheet
2.2 Unpacking
The shipping container and packing materials should be retained for possible reshipment.
Perform a receiving inspection as follows:
• Inspect
the shipping container for damage. If there is damage to the shipping
container, notify the carrier .
• Check
to determine that all parts, materials and documentation have been
shipped with the device.
• Inspect
the device for possible physical damage.
• Test
the device for proper operation.
2-1