Cadac SAM - Manual (Page 33)

Starting a show 4-7
Revision SAM2005-2 Sound Automation Manager
71916 $GGLQJ#D#1HZ#&XH
You can add a cue to the existing show by:
■ ■ ■ ■ Press the F5 key/click on its icon or press Insert to insert a new cue immediately
after the Edit Cue, or
■ ■ ■ ■ Right-click in the Cue View to show a menu (see fig 4-9 ).
■ ■ ■ ■ In the menu, select New Cue to add a new cue to the END of the cue list.
The new cue will be given the next sequential whole number.
To add a new cue somewhere into the middle of the cue list:
■ ■ ■ ■ Select a cue by clicking on its name (a coloured bar appears at the left-hand side
of the window).
■ ■ ■ ■ Right-click to show a menu.
■ ■ ■ ■ In the menu, click New Cue.
SAM will insert a new cue after the one you selected, and give it an appropriate
number.
Note that the smallest gap allowed between cues is 0.01. Therefore, if you try to add
a cue into a gap that is already as small as it can be, SAM will add the cue with a
#
in
the cue number column. To give the cue an appropriate number, use the renumber or
move functions as described below.
FIG 4-9. Adding a cue
to an existing show.
&XUUHQW#FXH
5LJKW0FOLFN#LQ#WKH &OLFN#1HZ#FXH
&XH#ZLQGRZ#WR
VKRZ#D#PHQX
(GLW#FXH
FIG 4-10. Adding a
new cue after a select-
ed cue.
6HOHFW#D#FXH 5LJKW0FOLFN#LQ#WKH#ZLQGRZ &OLFN#1HZ#FXH