Cadac SAM - Manual (Page 20)

2-8 Set the console configuration
Sound Automation Manager Revision SAM2005-2
51419 6pDQFH
In order for SAM Setup to be able to communicate with the console, the Séance net-
work port has to be open. To open the port, click on Séance in the menu bar and
select Open Port.
The greyed out options in the Séance menu become selectable, see fig 2-10 .
FIG 2-9. Open Seance network port.
&OLFN#6pDQFH &OLFN#2SHQ#SRUW
Verify Network
6HWWLQJV
&OLFN#2.
FIG 2-10. The Seance menu.
Click to close port
Click to update, see 2.1.7
Update Séance
In order to avoid over-writ-
ing essential data,
extreme care must be
observed when using
these options. Further
information available from
CADAC.