Cadac SAM - Manual (Page 15)

Set the console configuration 2-3
Revision SAM2005-2 Sound Automation Manager
51414 &RQILJXULQJ#WKH#IUDPH
In the SAM Setup window, the individual Frame configuration has two columns,
Fader type and Module type (see
fig 2-4 ). The columns may show up to 64 positions.
The number in the index column indicates the frame position of each module or
fader. Use the scroll bar to show more positions.
■ ■ ■ ■ To select module or fader type, move the cursor over the box in the desired posi-
tion in the module column.
■ ■ ■ ■ Click in the box. Each click moves on to another module type.
For each module being selected, a corresponding coloured block is added to the
frame simulation block row at the bottom of the window. A colour key indicating the
type of module or fader that has been selected is located on the right hand side of
the window.
Another way of selecting module types is to click-drag in the block row:
1. Move the cursor so that it is inside of the box that contains the frame simulation
block row.
2. Press and hold down the left mouse button while dragging a box around the
desired module positions.
3. Release the mouse button when the desired module positions have been
selected.
4. Click the right mouse button to select module type for the selected blocks.
FIG 2-4. Select modules by clicking on them and then right-click to show a menu or drag a box around the modules and
then right-click.
6HOHFW#PRGXOH#W\SH
&OLFN0GUDJ#D#EORFN#RI#PRGXOHV