4 stereo input module 7761, 76whuhr#,qsxw#prgxoh#::94, 6whuhr#,qsxw#0rgxoh#:;37 – Cadac F-Type User Manual
Page 57

Stereo Input module 7761
4-1
Revision F2005-2
F-Type
7
6WHUHR#,QSXW#PRGXOH#::94
The Stereo Input Module 7761 has eight stereo inputs.CADAC’s low-noise input
amplifier is used in this module as well as in every other F-Type input module. The
gain for each channel is controlled by one knob in segments of five dB in the range 0-
60dB.
The balance control gives a level increase of 6dB to LEFT or RIGHT from the centre
position. The -20dB Pad and Phantom Power switches apply to both inputs whereas
most other functions can be switched ON and OFF independently. The stereo mod-
ule is fitted with a four-band bell-response equalizer including HP and LP-filters a
slope of 12dB/octave.
The 7761 is available with a motorized fader.
The following pages describes the Stereo Input module in detail.
6WHUHR#,QSXW#0RGXOH#:;37
This module is similar to 7761 above, but has only 4 stereo inputs.
The 7804 is optionally available with a motorized fader.