Cadac F-Type - Manual (Page 50)

3-2 Input modules
F-Type Revision F2005-2
61414 ,QSXW#5#21
This programmable switch selects the signal from the input amplifier ON or OFF.
Since these switches are programmable, the twin input version is a very powerful
console.
61415 ,QSXW#5#*DLQ
Use this potentiometer to adjust the gain for Input 2. The input gain is continuously
variable from +10dB (minimum) to +60dB. Combined with the use of the -20dB pad,
this allows a wide range of input devices including ribbon, dynamic electret and
capacitor microphones: CD players, Mini Disc and Reel to Reel tape decks etc.
61416 ,QSXW#5#053G%#3DG
This switch puts a 20dB attenuation pad in series with the I/P signal. Use this func-
tion when the input signal is at line level, or to reduce the overall gain by -20dB.
61417 ,QSXW#5#3KDVH#5HYHUVH
Use this switch to change the phase of the input signal. When this function is
selected, the incoming signal has its phase changed by 180
ƒ1
3.1.1 Input 2 ON
3.1.3 Input 2 -20dB Pad
3.1.4 Input 2 Phase Reverse
3.1.5 Input 2 Phantom Power
3.1.7 Input 1 ON
3.1.9 Input 1 -20dB Pad
3.1.10 Input 1 Phase Reverse
3.1.11 Input 2 Phantom Power
3.1.13 Oscillator Routing
3.1.15 Pan ON/OFF
3.1.2 Input 2 Gain
3.1.6 Input 2PFL
3.1.8 Input 1 Gain
3.1.12 Input 1 PFL
3.1.14 Routing
3.1.16 Pan control