Cadac F-Type - Manual (Page 54)

3-6 Input modules
F-Type Revision F2005-2
614157 9&$#0XWH2$X[#IURP#9&$
The programmable MUTE function only mutes a signal that is controlled by a VCA
element. If a MUTE is required to cut the main audio path and the post fader Auxil-
iary Sends, then Aux VCA must be ON.
614158 5HDG\
The Ready LED is associated with the motor fader functions, SAFE, READY and
WRITE.
3.1.21 Insert
3.1.22 AUX/VCA
3.1.23 VCA Group Select
3.1.24 VCA Mute
3.1.25 Ready
3.1.26 Isolate
3.1.30 LED bargraph meter
3.1.27 PFL
3.1.28 Hexadecimal display
3.1.29 Mute
3.1.31 Fader
READY LED Mode System response
OFF SAFE No dynamic data will be sent from the fader to the
PC, but the fader will respond to data from the PC.
ON READY The fader is ready to send data to the PC, but no
data will be sent until WRITE mode is invoked by
touching the fader knob. The fader will respond to
data sent from the PC.