Cadac C-Type - Manual (Page 41)

Aux Groups Output Module 8065 5-5
Revision C2005-2 C-Type
815 $X[#*URXSV#2XWSXW#PRGXOH#;398#0#UHDU#SDQHO
LEFT OUTPUT FOR FOLDBACK MONITORS
RIGHT OUTPUT FOR FOLDBACK
MONITORS
AUXILIARY GROUP 4 OUTPUT
AUXILIARY GROUP 3 OUTPUT
AUXILIARY GROUP 2 OUTPUT
AUXILIARY GROUP 1 OUTPUT
Inputs and Outputs are electronically
balanced and connected via 3-pin XLRs
and follow the wiring
convention:
PIN 1 = Screen
PIN 2 = In-phase signal (hot)
PIN 3 = Out-of-phase signal (cold)
IMPORTANT NOTE: Pin 1 on XLR con-
nectors and the ‘sleeve’ connections
on the jack sockets are connected to
the FRAME. This is to ensure that the
console can comply with the Electric
Compatibility (EMC) directive.