Cadac C-Type - Manual (Page 30)

3-6 Dual Mono Group & Playback Module 8063
C-Type Revision C2005-2
615 'XDO#0RQR#*URXS#)#3OD\EDFN#;396#0#UHDU#SDQHO
The SEND and RETURN insert points
are electronically balanced and follow
the wiring convention:
TIP = In-phase signal (hot)
RING = Out-of-phase signal (cold)
SLEEVE = Screen
Output of the ‘ODD’ group.
Playback input to the ‘ODD’ group from
recorder.
Group output to external meters (see
chapter 8 for connection details)
The SEND and RETURN insert points
are electronically balanced and follow
the wiring convention:
TIP = In-phase signal (hot)
RING = Out-of-phase signal (cold)
SLEEVE = Screen
Output of the ‘EVEN’ group.
Playback input to the ‘EVEN’ group.
Inputs and Outputs are electroni-
cally balanced and connected
via 3-pin XLRs and follow the
wiring
convention:
PIN 1 = Screen
PIN 2 = In-phase signal (hot)
PIN 3 = Out-of-phase signal
(cold)
IMPORTANT NOTE: Pin 1 on
XLR connectors and the
‘sleeve’ connections on the
jack sockets are connected to
the FRAME. This is to ensure
that the console can comply
with the Electric Compatibility
(EMC) directive.