BUG-O Systems Piper-Plus User Manual
Page 9
9
SECTION 1.0 TECHNICAL SPECIFICATIONS
WELDING POWER SOURCE:
• Lincoln Electric Power Wave
®
S350 (Optional STT
®
Module)
• Parts and Service by any Lincoln Electric Distributor around the world, www.lincolnelectric.com
TORCH:
• 450 amp consumable parts
• 500 amp conduit cable
COOLING OPTIONS:
• Air Cooled (Standard)
• Water Cooled Neck and Nozzle option available using Lincoln Electric Cool-Arc
®
40
─ Available in 120 and 240 volt options
─ 2 gallon reservoir
• Water cooled torch system has integrated flow sensor to prevent welding if water flow is not present.
Lincoln Electric Cool Arc
®
40:
(Only used if water cooled option is installed.)
34" x 9" x 9" (86.3 x 22.9 x 22.9 cm)
Empty: 45 lbs (20.4 kg)
Full: 61.2 lbs (27.7 kg)
2 gallon (7.57 liter)
115 and 220 Volt options
CE (EUROPE) and C-Tick (Australia Compliant (220 Volt unit only)
For Use Above Freezing: Clean tap, distilled or de-ionized water.
For Use Below Freezing: 50% water and 50% pure ethylene glycol
(reagent or industrial grade) mixture.
DO NOT USE: Automotive anti-freeze that contains rust inhibitors or lead stoppers. These
coolants will damage the pump and block the small internal passageways of the heat exchanger,
affecting cooling performance. To acquire the proper coolant contact a local welding distributor.