BUG-O Systems Piper-Plus - Manual (Page 7)

7
BRR-3250-XX - Bent Rigid Rail - Aluminum Extrusion built to specific dimensions for given pipe
O.D. (Equipped with Spring Loaded Feet, Integral Hinge and Latch Assembly)
PSR-2000-XX - Piper Stainless Rail - Stainless Steel Band, 6 inches in width, designed for specific
pipe O.D. (Equipped with Rigidly Adjustable Feet and Latch Assembly)
(Each rail type requires a specific carriage. See factory for details.)
RAIL/TRACK OPTIONS:
SECTION 1.0 TECHNICAL SPECIFICATIONS
16" (457.2 mm) minimum Outside Diameter
PIPE SIZE:
Oscillation Stroke:
.01 - 2" (.25 - 50.8 mm)
Oscillation Speed:
5 - 130 ipm (12.7 - 330 cm/min)
TORCH OSCILLATION (Built in Linear):
VERTICAL TORCH MOTION - MOTORIZED
Stroke length (total): 4" (101 mm)
Motor will support 20 lbs (9 kg.)
Oscillation Dwell:
0 - 10 seconds, independently set on left and
right as needed
Cross Seam Adjustment (Steering):
up to 2" (50.8 mm) left and right with a total of 4"
(101.6 mm total)
TORCH POSITION ADJUSTMENT - MECHANICAL
Hand adjustment eliminates the need for tools to make adjustments (torch angle and lead, push
lag, drag.)