BUG-O Systems Piper-Plus - Manual (Page 18)

18
3.1.9.2 Replace – If this option is selected, the data on the USB Drive will replace all of the
information presently stored in the Control Box. After clicking the Replace button on the
screen shown in Figure 3.1.9, the screen in Figure 3.1.9.2 will appear which explains what
will happen with the transferred data. Clicking Yes will cause the data to be transferred.
Figure 3.1.9.2– Transfer Replace USB Screen
3.1.10 Transfer Datalog – This function is only available in specific cases. Please contact Bug-O
Systems factory for details.
3.1.11 Global Config – This button allow the Administrator to enter the Global Configuration
Screen. See SECTION 7.
3.1.12 Disable Admin – Clicking this button turns off the Administration function and returns to the
Main Screen. See Figure 3.1.
3.1.13 Software version – It may be necessary to have this number available if calling the factory
for service support.
SECTION 3.1.0 DISPLAY SCREEN - MAIN SCREEN - ADMIN. FUNCTION ACTIVE