BUG-O Systems Piper-Plus - Manual (Page 13)

13
SECTION 3.1.0 DISPLAY SCREEN - MAIN SCREEN - ADMIN. FUNCTION ACTIVE
The system allows managers and engineers to have total control over the system and how it is used.
They have the option to set up the structure of the configurations, making it possible to have one
configuration set for all of the machines worldwide. It is also possible to have a separate configuration
for every machine. Users can be given enough control to adjust all welding parameters, or have
nothing available to them except for start, stop and steering.
To enter administration mode, click on “Enter Admin PIN” and enter the pin number or password and
press Enter (See SECTION 3.3). This will reveal the hidden administrator buttons.
The default PIN number is 123.
This screen is displayed once the Admin Function has been enabled.
Figure 3.1.1 – Main Screen – Admin Function Active
3.1.1 DISPLAY – This area displays a list of all folders available within the machine. Use the
MOUSE (See 2.4) to move the cursor over the required folder. Highlight selection by clicking
the Left Mouse button.
3.1.2 Run – Clicking on this button will put the machine in RUN MODE. It will load the folder
highlighted in the DISPLAY (See SECTION 3.1.1). The screen will change to the RUN
screen as shown in SECTION 4.0. PLEASE NOTE: The system is not capable of any
motion, jog or automatic, unless it is in RUN MODE.
3.1.1
3.1.2
3.1.3
3.1.4
3.1.5
3.1.6
3.1.7
3.1.8
3.1.9
3.1.10
3.1.11
3.1.12
3.1.13