Important safeguards – Bolide SVR9000DMOB_W User Manual
Page 4
User Manual
Important Safeguards
In order to avoid any risk of fire, electric shock and other personal injury,
please pay attention to below important safeguards measurement:
1.
This equipment should be installed with care. Quick stops and excessive force
may cause the equipment to damage or overturn.
2.
Never push objects of any kind through openings of this equipment and / or
spill liquid of any kind on the equipment as they may touch dangerous voltage
points or short out parts that could result in a fire or electric shock.
3.
Do not attempt to service this equipment yourself. Refer all serving to qualified
service personnel.
4.
Do not install near any heat sources, dusty and intense magnetic field.
5.
Do not use this equipment near water or in contact with water.
6.
Unplug this equipment and refer all servicing to qualified service personnel
under the following condition:
z When the equipment exhibits a distinct change in performance, or
z
When liquid is spilled or objects have fallen into the equipment.
7.
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles and the point where they exit from the equipment.
8.
Operator or installer must remove power, BNC, alarm and other connections
before moving the equipment.
9.
The equipment should be installed at someplace where passenger or driver
cannot be easy to damage device, camera, alarm and cord and other
accessory.
10.
This equipment should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power, please
consult your equipment dealer.