Q-See QSD2316L - Manual (Page 34)

QSD2308L/QSD2316L DVR User’s Manual
30
Fig 3.28 Set Cruise
STEP5 Select a preset in left preset list, click – button to delete the preset.
Click ↑,↓,↑,↓ to adjust the sequence of the presets in the auto cruise setup.
Click Save to save and return to the previous interface.
STEP6
Click OK button to save and exit. Press right mouse button to show
the control bar. Click PTZ to enter PTZ control, shown as Fig 3.29 PTZ
Control.
Fig 3.29 PTZ Control
STEP7 Select the speed dome. Click the direction buttons to move the
camera. Click the relative + and – buttons to adjust zoom, focus, IRIS and
speed. Click
□ button to stop the change.
STEP8 Select the preset, the speed dome will go to that point directly.
Select Cruise, it will do auto cruise.