Q-See QSD2316L - Manual (Page 15)

QSD2308L/QSD2316L DVR User’s Manual
11
2.4 Remote Control
The remote control uses two AAA batteries, instructions for loading:
STEP1 Open the battery cover of the Remote Control
STEP2 Insert batteries with the poles (+ and -) correctly aligned
STEP3 Replace the battery cover
Note: If remote does not function check the following:
1. Check polarity of batteries
2. Check the remaining charge in the batteries
3. Check to see if remote control sensor is blocked
If it doesn't still work, exchange for a new remote control or contact your dealer.
The interface of the remote control is shown in Fig 2.10
Fig 2.8 Remote Control
Item Name Function
1 Power Button
Push button softly to stop firmware running before pushing harder to
power off.
2 INFO Button
Get information about the DVR such as firmware version, HDD
information
3 REC Button To record manually
4 Number Buttons Input numbers or choose camera
5
Multi Screen
Button
To choose multiple screen display mode
6 SEARCH Button To enter search mode
7 MENU Button To enter menu
8 ENTER Button To confirm the choice or setup
9 Direction Button Move cursor in setup or control PTZ camera
10 +/- Button To increase or decrease the value in setup
11
Playback
Control Button
To control playback. Fast forward/rewind/stop/single frame play
12 AUDIO Button To enable audio output in live mode
13
Auto Dwell
Button
To enter auto dwell mode
14 BACKUP Button To enter backup mode
15
PTZ Control
Button
To control PTZ camera. Move camera/ZOOM/FOCUS/IRIS/SPEED
control
Table 2.2 Functions of Remote Control Buttons