Besa Lighting Groove (Vanity) - Manual (Page 2)

FIXTURE INSTALLATION GUIDE
All electrical connections and the installation of this fixture must be in agreement with local codes,
ordinances or the NEC (National Electric Code) or CEC (Canadian Electrical Code).
Do not connect this fixture to an electrical system that does not provide a means for equipment grounding.
CAUTION: Turn off power to electrical box before installing
DIAGRAM B (Replacing Decorative Finial with Decorative Cap)
DIAGRAM A (Inverting Socketholders for Downlighting)
Loosen the Hex Nut inside canopy,
releasing the Socketholder. Rotate
the Socketholder into a downward
position.
Hold the Socketholder against the canopy
and secure with the Hex Nut.
Using Hex Wrench provided,
loosen the Set Screw on the
Socketholder, releasing the
Decorative Finial. Pressure
may need to be applied to
fully remove the finial.
Replace the Decorative
Finial with the Decorative Cap
Tighten the Set Screw to secure
the Decorative Cap
6695 Taylor Rd. Blacklick, OH 43004
www.besalighting.com